The working mode and main parameters of the winding machine tensioner

How the winding machine tensioner works:

The winding machine tensioner is mainly used in the tension system whose actuator is a magnetic powder clutch or a magnetic powder brake, and is suitable for manual control, semi-automatic control (roll diameter tension control) and automatic tension control system.

The winding machine tensioner is to manually adjust the excitation current of the clutch or brake according to the change of the diameter of the rewinding or unwinding, so as to obtain a certain tension.

The winding machine tensioner is also called the coil diameter tension controller. The controller can automatically detect the coil diameter of the rewinding or unwinding, and automatically adjust the excitation current of the clutch or brake according to the set target tension and the measured coil diameter. Control the tension of the web.

The winding machine tensioner can measure the actual tension of the coil material, and automatically adjust the excitation current of the clutch or brake according to the set target tension and the measured tension after PID operation to control the coil tension. The fully automatic tension controller has extremely high tension control accuracy and is suitable for use in occasions that require high tension control accuracy.

Main parameters of winding machine tensioner

1. Tension control range: 0～full scale

2. Tension controller: sensitivity 2mv/v DC10V

3. Control accuracy: 2[%]

4. Output current: 0.04～3A (RL=12 ohm)

5. Synchronous output: 0-20mA (or customized 4-20mA)

6. Power supply voltage: 220v±10[%]