What is the main control mode of tension control equipment?

As a relatively high-precision tension output device. There are three basic control methods used when performing tension control. Tension control equipment First of all, the first basic control method is the manual control method. In fact, when controlling the size of the force, according to the situation of discharging and receiving, and then manually adjust the size of the torque. The reduced order obtains the required amount of tension. The biggest feature of this manually controlled equipment is that it can save energy, and then it can be operated more flexibly under low speed conditions. But if the speed is relatively fast, it may not be so good for manual operation. So there are the following two common control methods.

The second control method of tension control equipment is the semi-automatic control method. This equipment may use the principle of ultrasound when it is operating. In the actual tension control, the semi-closed loop method is used for control, and the output torque can be adjusted ideally, and it can also prevent unwinding or breakage in actual use. . This kind of semi-automatic control device is now used more in the field of machinery, and it is still very popular because of its relatively low cost. Next there is a control method called fully automatic. This control method is relatively high-end. Under this control mode, there will be certain sensors in the machine. These sensors are in operation at any time, capturing various parameters of the operation at any time, and then directly through the microcomputer. Precise control of parameter analysis. Generally speaking, this fully automatic control method is the most popular in high-speed operation mode.

There are several common control methods of tension control equipment, so I will share so much with you. In fact, this kind of equipment will use automatic control mode more often now, especially in the winding production, when the rapid winding operation is performed, the speed is very fast, and it is completely impossible to control it manually. . Therefore, there is such a fully automatic refrigeration differential output and control, and a large amount of data generated during the operation can be stored. With the touch screen, you can clearly see the parameters of the equipment when it is running. At the same time, it can also ensure a very stable tension during operation.

Link: https://www.zhengtaifeng.com/en/Windingmachine/305.html