What's different about a magnetic tensioner with a cylinder?

MTQ magnetic tensioner

Features

The tension range is large, and the latest anti-jumping structure is adopted;

The tension scale corresponds to the uniform precision of the tension value, which is convenient for the debugging of multiple machines;

The installation hole diameter is 016mm, the vertical structure, the swing range of the anti-tension rod is large Take-up is long;

Tension generation uses multiple pairs of NS magnetic fields, no mechanical friction, and good tension stability;

Main components: 0-shaped ring, all bearings are imported high-quality products;

Test Conditions：

The linear speed is 10m/s, and the line starts instantly and stops in an emergency. The tension of uniform winding state is stable at ±1%g

Precautions：

Read the product manual carefully before use;

If you stop using for a long time and the damping wheel shakes, you must perform degaussing treatment before starting up: first adjust the tension clockwise to the maximum value, and then immediately adjust the tension to the minimum counterclockwise to complete it. Degaussing treatment;

When debugging, first adjust the tension to the required scale position, and then adjust the anti-tension knob to make the tension bar work between the two red marking lines;

Reasons for the tension value not to be adjusted: 1) Wool pre If the tightening force is not enough, the pressing force of the wool felt should be adjusted; 2) O-ring and wool felt are too dirty, clean or replace in time;

When adjusting the tension or back tension, stop the winding machine first;

Sheep Please replace the thickness of the felt with the specifications at the factory, otherwise it will cause the thread to not pass smoothl.

Features

The tension range is large, and the latest anti-jumping structure is adopted;

The tension scale corresponds to the uniform precision of the tension value, which is convenient for the debugging of multiple machines;

The installation hole diameter is 016mm, the vertical structure, the swing range of the anti-tension rod is large Take-up is long;

Tension generation uses multiple pairs of NS magnetic fields, no mechanical friction, and good tension stability;

Main components: 0-shaped ring, all bearings are imported high-quality products;

Test Conditions：

The linear speed is 10m/s, and the line starts instantly and stops in an emergency. The tension of uniform winding state is stable at ±1%g

Precautions：

Read the product manual carefully before use;

If you stop using for a long time and the damping wheel shakes, you must perform degaussing treatment before starting up: first adjust the tension clockwise to the maximum value, and then immediately adjust the tension to the minimum counterclockwise to complete it. Degaussing treatment;

When debugging, first adjust the tension to the required scale position, and then adjust the anti-tension knob to make the tension bar work between the two red marking lines;

Reasons for the tension value not to be adjusted: 1) Wool pre If the tightening force is not enough, the pressing force of the wool felt should be adjusted; 2) O-ring and wool felt are too dirty, clean or replace in time;

When adjusting the tension or back tension, stop the winding machine first;

Sheep Please replace the thickness of the felt with the specifications at the factory, otherwise it will cause the thread to not pass smoothl

It is a standard tensioner without a cylinder. With a cylinder, the back tension can be attenuated. This function is suitable for actions during the winding process (foot wrapping and slotting) to achieve 2-stage tension switching.

Reference link: https://www.zhengtaifeng.com/en/Windingmachine/436.html

Youtube video link: https://youtube.com/shorts/O8iSA4gLjns