What is the difference between grinding machine ceramic and ordinary ceramic

Oxide ceramics belongs to an industrial ceramics. Using this kind of ceramics to make reasonable processing, it can create ceramics replacing metal parts. The use of ceramic parts is more long -lasting.

The characteristics of alumina ceramics: First of all, its strong strength can achieve HRA80-90; its abrasion resistance is very good. Above it; followed by the net weight of aluminum oxide ceramics, its relative density is 3.65g/cm, which can greatly reduce the load of the equipment; alumina ceramics are firmly adhered to the equipment and good thermal resistance, which can be at 350, which can be at 350, which can be at 350. It can be operated for a long time under ℃.

https://www.zhengtaifeng.com/en/Ceramicproducts/579.html

What are the basic principles of grinding equipment ceramic products? The raw material composition and brand advantage of the grinding equipment ceramic board meta device!

1. Basic steel plate: Select the milky white double-layer alumina ceramics, а AL2O3 composition is not less than 95 %

2. Wire: Nickel wire with 40.48mm.

3. Waterproof sleeve, tape paper: Iron Flong, high temperature resistance

4. resistance: tungsten and other high temperature materials

The grinding equipment ceramics, it is a kind of hot surface after receiving the power supply, not induced, no light fire, the appearance design is round or square, the trusted grinding tablet. The heating board depends on thermal conductivity during the application, so the thermal effect is high

Oxide ceramics is one of the materials with good comprehensive performance in the structural ceramic family, and is considered to be one of the high -temperature structural ceramic materials with future high -temperature structure. Oxide ceramics have high bending strength and fracture toughness, such as alumina ceramics prepared through hot -pressing sintering. At room temperature, the bending strength can reach 800-1050 MPa, the fracture toughness can reach 6-7 MPA · m1/2, and it has good wear resistance and certain self-lubricating ability.