Mechanical tensioner adjustment method and use note

Introduction to mechanical tensioner:

1. The damping device uses a magnet to produce a medium magnetic field. The material is crispy. Therefore, please do not disassemble in use to avoid damaging the parts.

2. If the phenomenon of tensioning the phenomenon of tension is arising during use, please repeat the steps of the above adjustment method 3 until the satisfaction tension is obtained.

3. Remove the tight screws, turn the scale to 10, and slowly turn the scale to 0 while rolling the spindle, and then turn to the required scale value to tighten the lock screw.

4. If it is used below the scale value of 4, it may produce the pulse of force. Please eliminate the pulsation according to the method of the subsequent item 3.

5. It is recommended that customers adjust the scale value to more than 4 or more. If the tension is too large at this time, it is best to choose a small -scale damping device.

Mechanical tensor adjustment method and pay attention to use:

1. The structural design is compact and small, and you can work in various positions.

2. The installation structure is simple, and the output of the torque adjustment profit. The damping disk does not contact the magnet and has no sliding friction.

3. Magnetic obstruction, also known as tension controller, tension or brake, is a device that conveys constant torque with magnetic fields as the medium.

Web links:

https://www.zhengtaifeng.com/index.php/en/WireTensioners/323.html

https://www.zhengtaifeng.com/index.php/en/WireTensioners/325.html

Video:

https://youtu.be/uVwzeGMVQiE

https://youtu.be/l5nmDZl-a70