Maintenance of nozzle products

Maintenance of nozzle products:

Wire nozzles can be divided into two types of materials: Tungsten carbide nozzle and Ruby nozzle:

For Tungsten carbide nozzle, it should be noted that the wire nozzles that have not been used on the machine should be packed in a sealed bag together with the packaging box, because the tungsten steel material is easily oxidized in the air. Once oxidized, oxidation spots will form on the surface, which is not easy. To remove it, prevent the wire nozzle from falling during the installation process. The hardness of the tungsten carbide material is very high, and the brittleness is also very large, and it will be broken when it falls.

Link: https://www.zhengtaifeng.com/en/CoilWindingNozzle/226.html

The body of the ruby thread nozzle is made of stainless steel. Although it will not be broken, it is easy to deform. Once it is deformed, it cannot be used. During the use process, it is best to have two sets of thread nozzles, one for on-machine use and one for use. Just soak it in alcohol, this maintenance can make the inner hole of the wire nozzle not easy to be blocked, just blow it down with an air gun when using it. The last thing to remind is that when you get the company's product and open the package, pay attention not to reverse the direction, it is best It is to open the parallel cover upwards, so as to avoid all the thread nozzles falling off, and the loss may be large. The above suggestions are for reference only.

Link: https://www.zhengtaifeng.com/en/CoilWindingNozzle/227.html